· A.A. OZALP, 2011, “Fluid Mechanics,
Heat Transfer and Thermodynamic Issues of Micropipe
Flows”, Evaporation,
Condensation and Heat Transfer, Amimul Ahsan (Ed.), ISBN: 978-953-307-583-9, InTech.
· A. UYSAL, A.A. OZALP, A. KORGAVUS, O.
KORGAVUS, “Numerical
Modeling of the Momentum and Thermal Characteristics of Air Flow in the
Intercooler Connection Hose”, Int. J.
Adv. Manuf. Tech., (In Press)
· A.A. OZALP, “Laminar-Transitional Micropipe Flows: Energy and Exergy Mechanisms Based on Reynolds Number, Pipe Diameter, Surface Roughness and Wall Heat Flux”, Heat Mass Trans., 48: 17-34.
· A.A. OZALP,
· A.A. OZALP,
· A.A. OZALP, 2010, "Combined Effects of
Pipe Diameter, Reynolds Number and Wall Heat Flux on Flow, Heat Transfer and
Second-Law Characteristics of Laminar-Transitional Micro-Pipe Flows", Entropy, 12: .445-472.
· A.A. OZALP, 2009, “1st
and 2nd Law Characteristics In a Micropipe: Integrated Effects of Surface Roughness, Heat
Flux and Reynolds Number”, Heat Trans.
· A.A. OZALP, 2009, “Entropy Analysis of
Laminar Forced Convection in a Pipe with Wall Roughness”, Int. J. Exergy, 6: 249-275.
· A.A. OZALP, 2008, “Roughness Induced
Forced Convective Laminar-Transitional Micropipe
Flow: Energy and Exergy Analysis”, Heat Mass Trans., 45:
31-46.
· A.A. OZALP, 2007, “Parallel
Effects of Acceleration and Surface Heating on Compressible Flow: Simulation of
an Aerospace Propulsion-Nozzle with a Medium Amount of Surface Wear”, Strojniski Vestnik–J. Mech.
· B.T. OZALP, A.A. OZALP, 2006, “Slider-Bearing Design
with Micro-Machined Wavy-Cavity: Parametric Characterization of Thermohydrodynamic-Operation-Scheme”, J. Mech. Sci Tech., 20:
1590-1606.
· H. UMUR, A.A. OZALP, 2006, “Fluid
Flow and Heat Transfer in Transitional Boundary Layers: Effects of Surface
Curvature and Free Stream Velocity”, Heat Mass Trans., 43: 7-15.
· A.A. OZALP, H. UMUR, 2006, “Optimum Surface
Profile Design and Performance Evaluation of Inclined Slider Bearings”, Current Science, 90: 1480-1491.
· A.A. OZALP, 2006, “Nonadiabatic and Frictional Constant Area Duct Flow: A
Visual Software Based Simulation for Compressible Systems”, Comp. Appl. Eng. Educ., 14: 64-75.
· B.T. OZALP, A.A. OZALP, 2006, “A Computational Approach on the Multitask Optimization of Inclined Slider Bearing Performance with Upper-Surface-Waviness (USW)”, Lect. Notes Comp. Sci., 3743: 526-534.
· A.A. OZALP, 2006, “Numerical Analysis of
Choked Converging Nozzle Flows with Surface Roughness and Heat Flux Conditions”,
Sadhana-Academy Proc.
· A.A. OZALP, 2005, “A Computational Study to Predict the Combined Effects of Surface Roughness and Heat Flux Conditions on Converging Nozzle Flows”, Trans. Can. Soc. Mech. Eng., 29: 67-80.
· H. UMUR, A.A. OZALP, 2004, "Laminar and Turbulent Forced Convection in Accelerating and Decelerating Boundary Layers", Current Science, 87: 1237-1244.
· A.A. OZALP, S.A.OZEL, 2003, "An Interactive Software Package for the Investigation of Hydrodynamic-Slider Bearing-Lubrication", Comp. Appl. Eng. Educ., 11: 103-115.
· A.A. OZALP, H. UMUR, 2003, "An Experimental Investigation of the Combined Effects of Surface Curvature and Streamwise Pressure Gradients Both in Laminar and Turbulent Flows", Heat Mass Trans., 39: 869-876.
· A.A. OZALP, H. UMUR, 2002, "Flow and Heat Transfer Measurements in Laminar and Turbulent Convex Surface Boundary Layers", Int. Comm. Heat Mass Trans., 29: 841-851.
· A.A. OZALP, 1999, "A Computer Assisted Approach to Industrial Gas Turbine Performance Calculation", Comp. Appl. Eng. Educ., 7: 171-179.
Academic Search
Premier Journal
· A.A. OZALP, 2000, "A Computer Assisted Approach to Compressible Variable Area Duct Flow", The Int. J. Mech. Eng. Educ., 28: 255-267.
· A.A. OZALP, I.
DINCER, 2010, “Blockage induced hydrodynamic, thermal and mass transfer
characteristics of a circular cylinder”, 5th
International Ege Energy Symposium, ieese261, Denizli-TURKEY.
·
· A. UYSAL, A. KORGAVUS, O. KORGAVUS, A.A. OZALP, 2010, “Numerical Modeling of the Momentum and
Thermal Characteristics of Air Flow in the Intercooler Connection Hose”, 5th
Automotive Technologies Congress, Bursa-TURKEY.
· A.A. OZALP, 1999, "A Numerical Study to Determine The Effects of Fluid Type, Geometry and Inlet Conditions on Propulsion Nozzle Flows", 2nd Int. Symposium on Mathematical & Computational Applications, 45-51, Baku-AZERBAIJAN.
· A.A. OZALP, 1999,
"Hydrodynamic Lubrication of Plane Slider Bearings: A Computer Assisted
Approach", 2nd Int. Symposium on Mathematical & Computational
Applications, 38-44, Baku-AZERBAIJAN.
· A.A. OZALP, H. UMUR, 2000, "Influence of Adverse and Favorable Pressure Gradients on Boundary Layer Development over A Heated Horizontal Plate", The 12th Int. Symposium on Transport Phenomena, 81-86, Istanbul-TURKEY.
· A.A. OZALP, H. UMUR, 2002, "Transitional and Turbulent Transport Measurements on A Concave Wall in The Presence of Adverse and Favorable Pressure Gradients", The 13th Int. Symposium on Transport Phenomena, 181-186, Victoria-CANADA.
· A.A. OZALP, O. SECKIN, H. UMUR, 2003, "Concave Surface Velocity and Heat Transfer Measurements in Accelerating and Decelerating Boundary Layers", 1st Int. Exergy, Energy and Environment Symposium, 133-138, Izmir-TURKEY.
·